相关文档

• DS1302程序.doc

  include <reg51.h>include <intrins.h>define uchar unsigned chardefine uint unsigned intuchar count_10ms 定义10ms计数器sbitK1 = P32定义K1键sbitK2 = P33定义K2键sbitK3 = P34定义K3键sbitK4 = P35定义K4键sbit BEEP=P37定义

• ds1302汇编程序.doc

  ds1302汇编程序T_RST?Bit?P3.3 实时时钟复位线引脚T_CLK?Bit?P3.4 实时时钟时钟线引脚T_IO?Bit?P3.5 实时时钟数据线引脚SECOND?EQU?30HMINUTE?EQU?31HHOUR?EQU?32HDAY?EQU?33HMONTH?EQU?34HWEEK?EQU?35HYEARL?EQU?36H??????? ORG?0000H??????? LJ

• DS1302时钟程序.doc

  本文件包含C语言程序以及仿真原理图程序：include<reg52.h>include<intrins.h>define uchar unsigned char define uint unsigned intsbit sclk=P30sbit dio=P31sbit ce=P32sbit s0=P20sbit s1=P21uchar d[10]={0xc00xf90xa40xb00x990

• DS1302驱动程序.docx

  实时时钟模块 时钟芯片型号：DS1302 sbit T_CLK = P27 实时时钟时钟线引脚 sbit T_IO = P14 实时时钟数据线引脚 sbit T_RST = P15 实时时钟复位线引脚 名称: v_RTInputByte 说明: 功能: 往DS1302写入1Byte数据 调用: 输入: ucDa 写入的数据 返回值: 无void v_RTInputByte(uchar u

• ds1302的驱动程序.doc

  ifndef __ds1302_H define __ds1302_H------宏定义------define ucharunsigned chardefine uintunsigned intRTC常量define TRUE 1define FALSE 0define RTC_CLK PD2define RTC_DATA PD3define RTC_CS PD4命令define R

• DS1302程序和电路范例.doc

  The real time clock DS1302 base MCS-51 system by Wuhan Liyuan Research Instibute The real time clock DS1302 base MCS-51 system by Wuhan Liyuan Research Instibute of Single Chi

• DS1302数码管显示程序.doc

  huaqinMCU DS1302 实验程序 数码管显示 时钟设置说明 8键为时钟设置时分切换保存 0键为加 4键为减include <reg52.h>define uchar unsigned char define uint unsigned int===以下IO定义请根据您硬件的连接修改===sbit T_RST=P35ds1302-5sbit T_IO=P34ds1

• 实时时钟DS1302读写程序.doc

  #

• DS1302时钟DS18B20无线遥控应用程序.doc

  DS1302时钟DS18B20无线遥控应用程序include <>include <>include include define uint unsigned intdefine uchar unsigned charsbit DS1302_CLK = P17 实时时钟时钟线引脚 sbit DS1302_IO = P16 实时时钟数据

• 张军DS1302数码管电子闹钟程序.doc

  DS1302数码管3个独立按键 精确定时 Author： matrix QQ：466891291 TIME:2009313