基于12864及18B20的温度液晶显示include <>include <>include <>include <>include <>-------------------Define the registermand code----------------------define Disp_On 0x3fdefine Disp_Off 0x3edefine Col_Add 0x4
include <>define uchar unsigned chardefine uint unsigned intuchar code table[]=0123456789 uchar code table1[]=-uchar time tflagsbit rs=P20sbit rw=P21sbit e=P22sbit dq=P37void aaa(uchar) void
程序:include<>include<>define uchar unsigned chardefine uint unsigned intdefine LCD_databus P0sbit RS=P22 复位信号sbit RW=P21 读写 选择sbit EN=P20 读写 使能sbit CS1=P24 片选1sbit CS2=P23 片选2 void
名称: 12864液晶移动显示
----------------------------------------------- 名称:DS18b20 温度检测液晶显示 论坛:.doflye.net 编写:shifang 日期:2009.5 修改:无 内容:------------------------------------------------include<reg52.h> 包含头文件一般情况不需
12864液晶显示及程序 HYPERLINK eoffbest.blog.163blog l m=0t=1c=fks_087070092081086074092095086095093087089074087083080070 o 控制器 控制器 2010-12-30 10:39:29 阅读36 评论0 字号:大中小 订阅 硬件连接方式是:并口直接访问这是汉
12864液晶显示程序------file:12864.h--------------------------------------------------ifndef __12864_H__define __12864_H__include <reg52.h>include <intrins.h>sbit rs=P27sbit rw=P26sbit en=P25sbit psb=P24
在显示汉字的时候要注意不要在偶数的位置在偶数的位置是乱码希望大家多交流include <reg52.h>include <intrins.h>define uchar unsigned chardefine uint unsigned intdefine LCD_data P1 数据口sbit LCD_RS = P20 寄存器选择输入 sbit LCD_RW
Protues仿真液晶显示目录 TOC o 1-3 h z u HYPERLINK l _Toc269229868 1 LCD12864简介 PAGEREF _Toc269229868 h 2 HYPERLINK l _Toc269229869 2 LCD12864显示原理 PAGEREF _Toc269229869 h 6 HYPERLINK l _Toc
include<>define uchar unsigned chardefine uint unsigned intsbit LCD_RS=P35sbit LCD_RW=P36sbit LCD_EN=P34sbit LCD_PSB=P24sbit s1=P30独立按键sbit s2=P31sbit s3=P32sbit rd=P37sbit beep=P23定义蜂鸣器端口uchar miaos
违法有害信息,请在下方选择原因提交举报