相关文档

• 11_试卷107233(1).doc

  Text 1Four general types of cutting fluids aremonly used in machining operations: oils, emulsions, semisynthetics, and syntheticsOils maintain high film strength on the surface of a metal, as we

• 10_试卷106234(1).doc

  Text 1The relative severity of various machining operations is defined as the magnitude temperatures and forces encountered the tendency for built-up edge formation, and the ease with which chips ar

• 9_试卷105236(1).doc

  Text 1Also called lubricants and coolants, cutting fluids are used extensively in machining as well as abrasive machining processes to achieve the following results:1 Reduce friction and wear, thus

• 12_试卷108232(1).doc

  Text 1Four general types of cutting fluids aremonly used in machining operations: oils, emulsions, semisynthetics, and syntheticsAn emulsion is admixture of two immiscible liquids (usually of oi

• 13_试卷109231(1).doc

  Text 1There are three basic methods of cutting fluid application:1 Flood cooling This is the mostmon method Flow rates range from 10 L/min (3 gal/min) for single-point tools to 225 L/min (60 gal

• 111_试卷试题(1).doc

  Text 1The selection of a cutting fluid should also include considerations such as its potential effect on workpiece material and machine tools, biological factors, and environmental factorsBiologica

• 116_试卷试题(1).doc

  Text 1Four general types of cutting fluids aremonly used in machining operations: oils, emulsions, semisynthetics, and syntheticsOils maintain high film strength on the surface of a metal, as we

• 113_试卷试题(1).doc

  Text 1In addition to being familiar with the mechanicalponents, to be an effective engineer one should also have some hands-on experience with the machine tools and machining technique that one

• 118_试卷试题(1).doc

  Text 1Copper (Cu), first produced in about 4000 BC, and its alloy have properties somewhat similar to those of aluminum and its alloys In addition, they are among the best conductors of electricity

• 112_试卷试题(1).doc

  Text 1Copper (Cu), first produced in about 4000 BC, and its alloy have properties somewhat similar to those of aluminum and its alloys In addition, they are among the best conductors of electricity