相关文档

• 13_试卷109231(1).doc

  Text 1There are three basic methods of cutting fluid application:1 Flood cooling This is the mostmon method Flow rates range from 10 L/min (3 gal/min) for single-point tools to 225 L/min (60 gal

• 10_试卷106234(1).doc

  Text 1The relative severity of various machining operations is defined as the magnitude temperatures and forces encountered the tendency for built-up edge formation, and the ease with which chips ar

• 12_试卷108232(1).doc

  Text 1Four general types of cutting fluids aremonly used in machining operations: oils, emulsions, semisynthetics, and syntheticsAn emulsion is admixture of two immiscible liquids (usually of oi

• 11_试卷107233(1).doc

  Text 1Four general types of cutting fluids aremonly used in machining operations: oils, emulsions, semisynthetics, and syntheticsOils maintain high film strength on the surface of a metal, as we

• 9_试卷105236(1).doc

  Text 1Also called lubricants and coolants, cutting fluids are used extensively in machining as well as abrasive machining processes to achieve the following results:1 Reduce friction and wear, thus

• 30_试卷129213(1).doc

  Text 1The marketing department conducts market research and advertises, packages, sells, and distributes the product Market researchers do surveys to see what consumers want, if they like their prod

• 133-134测试.doc

  #

• 131_试卷试题(1).doc

  Text 1Metals are found everywhere in our life They are classified into two categories, “ferrous” and “non-ferrous” metals Ferrous means relating to, or containing iron and non-ferrous means having n

• 113_试卷试题(1).doc

  Text 1In addition to being familiar with the mechanicalponents, to be an effective engineer one should also have some hands-on experience with the machine tools and machining technique that one

• 137_试卷试题(1).doc

  Text 1Metals are found everywhere in our life They are classified into two categories, “ferrous” and “non-ferrous” metals Ferrous means relating to, or containing iron and non-ferrous means having n