相关文档

• WB-Mech_120_WS_09.1.ppt

  Workshop 91Parameter ManagementWorkshop 91 – GoalsGoal: Use the Workbench Parameter Manager (available from the Project page) to setup multiple scenarios and solve all at one time Workshop 91 – Proj

• WB-Mech_120_WS_04.1.ppt

  Workshop 41Linear Structural AnalysisWorkshop 41 - GoalsWorkshop 4 consists of a 5 part assembly representing an impeller type pumpOur primary goals are to analyze the assembly with a preload on the

• WB-Mech_120_WS_06.1.ppt

  Workshop 61Steady State Thermal AnalysisWorkshop 61 - GoalsIn this workshop we will analyze the pump housing shown below for its heat transfer characteristicsSpecifically a plastic and an aluminum v

• WB-Mech_120_WS_02.1.ppt

  Workshop 21ANSYS Mechanical BasicsNotes on Workshop 21The first workshop is extensively documentedAs this course progresses, students will be more familiar with basic Workbench Mechanical functi

• WB-Mech_120_WS_03.1.ppt

  Workshop 31Contact ControlWorkshop 31 - GoalsWorkshop 31 investigates contact behavior on a simple assemblyIt is meant to illustrate how rigid body motion can occur as a result of improper contact s

• WB-Mech_120_WS_05.1.ppt

  Workshop 51Free Vibration AnalysisWorkshop 51 - GoalsOur goal is to investigate the vibration characteristics of amotor cover manufactured from 18 gage steelThe cover is to be fastened to a device o

• WB-Mech_120_WS_07.1.ppt

  Workshop 7Linear Buckling AnalysisWorkshop 71 - GoalsThe goal in this workshop is to verify linear buckling results in ANSYS WorkbenchResults will bepared to closed form calculations from a hand

• WB-Mech_120_WS_08.1.ppt

  Workshop 81Results ProcessingWorkshop 81 - GoalsIn this workshop a high pressure vent assembly is analyzed for stress and deflectionSome of the results from the analysis will be difficult to interpr

• WB-Mech_120_WS_04.2.ppt

  Workshop 422D Structural AnalysisWorkshop 42 - GoalsWorkshop 42 consists of a 2 part assembly representing a pressure cap and retaining flange (full model shown below)We will solve it as a 2D axisym

• WB-Mech_120_WS_03.2.ppt

  Workshop 32Meshing ControlWorkshop 32 - GoalsUse the various ANSYS Mechanical mesh controls to enhance the mesh for the model belowProblem statement:The model consists of a Parasolid file representi