相关文档

• GPON_734216160_开局配置(V1.0).doc

  54Document identificationVersionPage? Alcatel Shanghai Bell – ISE Central PM? Alcatel CIT 2001TBAUAZZA1021 6All rights reserved Passing on and copying of this document, use andmun

• 7342I-240G开局配置(V1.0).doc

  54Document identificationVersionPage? Alcatel Shanghai Bell – ISE Central PM? Alcatel CIT 2001TBAUAZZA1021 6All rights reserved Passing on and copying of this document, use andmun

• UA5000开局配置.doc

  Huawei HONET UA5000 Universal Access Unit. Copyright(C) 1998-2006 by Huawei Technologies Co. Ltd.备注蓝色部分为必须修改的命令红色部分是根据现场告警情况而定)>>User name:root>>User password:UA5000>enableUA5000terminal language

• MA5680T开局配置.doc

  OLT开局与基本配置 root 默认登陆用户名admin 默认登陆密码MA5680T> enable 进入特权模式MA5680T config 进入终端配置MA5680T (config) switch language-mode 中英文切换MA5680T (config)display board 0 查看所有的单板 0 是框号MA5680T (config) interface

• MA5680T开局与配置.doc

  开局与基本配置 root 默认登陆用户名admin 默认登陆密码MA5680T> enable 进入特权模式MA5680T config 进入终端配置MA5680T (config) switch language-mode 中英文切换MA5680T (config)display board 0 查看所有的单板 0 是框号MA5680T (config) interface gpo

• 7342META16160开局配置1.doc

  54Document identificationVersionPage? Alcatel Shanghai Bell – ISE Central PM? Alcatel CIT 2001TBAUAZZA1021 6All rights reserved Passing on and copying of this document, use andmun

• 7342EPON7330开局配置(Ed2.0).doc

  54Document identificationVersionPage? Alcatel Shanghai Bell – ISE Central PM? Alcatel CIT 2001TBAUAZZA1021 6All rights reserved Passing on and copying of this document, use andmun

• 7342META16160开局配置(Ed2.0).doc

  54Document identificationVersionPage? Alcatel Shanghai Bell – ISE Central PM? Alcatel CIT 2001TBAUAZZA1021 6All rights reserved Passing on and copying of this document, use andmun

• HG8240sip语音开局配置.doc

  华为HG8240开局配置模板OLT上对应的HG8240配置模板： 附件1语音配置参数表：配置项数据媒体与信令地址VLAN10.2.93.254 VLAN:1041(q-in-q) 2000VoIP协议Sip协议SBC地址端口120.195.9.1485060域名ims.js.chinamobileMA5680T(config)sysname SZYD-kuatang-MA

• 5680T开局数据配置5606T.doc

  华为MA5680T开局说明enconfig 进入到配置模式MA5680T(config)sysname DG_lianPing_MA5680T_1根据东莞电信epon工程命名规则进行命名MA5680T(config)board confirm 0 确定单板 只有输入此命令后设备上的单板状态才会变为正常状态vlan 90 smart