相关文档

• 12_试卷108232(1).doc

  Text 1Four general types of cutting fluids aremonly used in machining operations: oils, emulsions, semisynthetics, and syntheticsAn emulsion is admixture of two immiscible liquids (usually of oi

• 10_试卷106234(1).doc

  Text 1The relative severity of various machining operations is defined as the magnitude temperatures and forces encountered the tendency for built-up edge formation, and the ease with which chips ar

• 11_试卷107233(1).doc

  Text 1Four general types of cutting fluids aremonly used in machining operations: oils, emulsions, semisynthetics, and syntheticsOils maintain high film strength on the surface of a metal, as we

• 9_试卷105236(1).doc

  Text 1Also called lubricants and coolants, cutting fluids are used extensively in machining as well as abrasive machining processes to achieve the following results:1 Reduce friction and wear, thus

• 13_试卷109231(1).doc

  Text 1There are three basic methods of cutting fluid application:1 Flood cooling This is the mostmon method Flow rates range from 10 L/min (3 gal/min) for single-point tools to 225 L/min (60 gal

• 123-124（1）.doc

  水利水电工程表 混凝土钢筋工序质量评定表单位工程名称南海堤段5600061286单元工程量混凝土30m3钢筋分部工程名称堤身防护工程施工单位广东省水利水电第三工程局单元工程名称部位堤顶砼路缘石5880058900检验日期2006年3月14日项次检查项目质 量 标 准检 验 记 录1△钢筋的数量规格尺寸安装位置符合设计图纸[图号DZ37（2）D5-133-29]钢筋3Φ6纵向布置

• 123-128(1).ppt

  #

• 124_试卷试题(1).doc

  Text 1A mill is versatile machine tool which is useful for machining the rough surface of a work piece flat and smooth and for shaping them with slots, and holes The work piece is held by a vise on

• 129_试卷试题(1).doc

  Text 1The marketing department conducts market research and advertises, packages, sells, and distributes the product Market researchers do surveys to see what consumers want, if they like their prod

• 102_试卷试题(1).doc

  Text 1The production department sets up and uses the tools and machines to make the product A management worker, the supervisor, is normally in charge of this department The supervisor tells the pro