相关文档

• 孔用挡圈尺寸表.doc

  当前位置： 首页 >  list22---1.aspx 零部件 >  list344---1.aspx 紧固件连接件 >  list352---1.aspx 卡簧挡圈 > 孔用弹性挡圈-50发黑 孔用弹性挡圈-50发黑产品名称：孔用弹性挡圈所在地区：浙江 温州市龙湾区 市场价格: 9元千件　（市场有波动价格均需 products138965.aspx l contac

• 孔用弹性挡圈.doc

  孔用弹性挡圈孔径孔 圈孔(推荐)轴d0DdCHb≈d1αRR1R2d2B2N≥d3≤88.770.30.811.245°3.210.88.40.91299.881.23.69.41010.88.30.411.71.54.11.5110.41.11.51111.89.24.611.43121310.45.112.541314.111.51.75.51.713.614

• 孔用弹性挡圈.doc

  孔用弹性挡圈—A型(摘自GBT893.1-1986)孔用弹性挡圈—B型(摘自GBT893.2-1986)d3――允许套入的最大轴径孔径d0挡 圈沟 槽(推荐)轴每1000个钢挡圈重量kg≈Dsd1bd2mn≥d3≤基本尺寸极限尺寸基本尺寸极限偏差基本尺寸极限偏差基本尺寸极限偏差88.70.36-0.100.60.04-0.07118.40.0900.70.1400

• DIN472孔用挡圈(中文).doc

  孔用弹性挡圈-德标DIN472?规格沟槽挡圈mm直径宽度深度厚度外径直径脚宽背宽小孔直径重量DhDgTol.WMin.dTTol.DfTol.HMax.S Ref.R Min.kg1000884009090020080-00587?241110010994?090020080?98?25131001310104?110020100?108?32141202611114?110020100?1

• 常用螺纹配孔及沉孔尺寸表.doc

  通孔与沉孔尺寸螺栓螺钉通孔(GBT5277-1985) ㎜螺纹规格dM1M1.2M1.4M1.6M1.8M2M2.5M3M3.5M4M4.5M5M6M7M8M10M12螺孔直径精装配中等装配粗装本1.11.71.51.722.22.73.23.74.34.85.36.47.48.410.513(GBT5277-1985)1.21.81.622.12.43.23.43.94.555.56

• 螺丝及沉头孔尺寸规格表内六角尺寸规格沉孔尺寸.doc

  螺丝及沉头孔尺寸表规格螺丝头直径螺丝头厚度螺丝杆直径沉头孔直径沉头孔深度通过孔直径M23.84.53.02.5M35.56.03.53.5M47.07.54.54.5M58.59.05.55.5M610.065.8116.56.5M812.087.8138.58.5M1015.0109.81610.510.5M1217.812.511.81912.512.5M14M16241615.9261

• 螺丝及沉头孔尺寸规格表--内六角尺寸规格--沉孔尺寸.doc

  螺丝及沉头孔尺寸表规格螺丝头直径螺丝头厚度螺丝杆直径沉头孔直径沉头孔深度通过孔直径六角承孔头螺丝[JIS B1176(1988) JIS B1176(1976)拔粹参考:对六角承孔头螺丝的沉头及螺丝孔的呎吋螺丝称号(d) document was truncated here because it was created in the Evaluation Mode. :

• 螺丝及沉头孔尺寸规格表--内六角尺寸规格--沉孔尺寸[1].doc

  螺丝及沉头孔尺寸表规格螺丝头直径螺丝头厚度螺丝杆直径沉头孔直径沉头孔深度通过孔直径参考:对六角承孔头螺丝的沉头及螺丝孔的呎吋螺丝称号(d)′ document was truncated here because it was created in the Evaluation Mode. : : :

• 螺丝及沉头孔尺寸规格表--内六角尺寸规格--沉孔尺寸[1].doc

  螺丝及沉头孔尺寸表规格螺丝头直径螺丝头厚度螺丝杆直径沉头孔直径沉头孔深度通过孔直径M238453025M355603535M470754545M585905555M6100658116565M8120878138585M10150109816105105M12178

• O型圈尺寸.doc

  #