相关文档

• 数码管显示程序.doc

  程序功能：在八位数码管上显示数字include <msp430x14x.h>typedef unsigned char uchartypedef unsigned int uint共阴极数码管7位段码：0--fuchar scandata[16] = {0x3f0x060x5b0x4f0x660x6d0x7d0x07 0x7f0x6f0x770x

• 数码管显示程序.doc

  include <>define uchar unsigned chardefine uint unsigned intsbit duan=P27段sbit wei=P26位int code atm[]={ 0xc00xf90xa40xb0 0x990x920x820xf8 0x800x900x880x83

• DS1302数码管显示程序.doc

  huaqinMCU DS1302 实验程序 数码管显示 时钟设置说明 8键为时钟设置时分切换保存 0键为加 4键为减include <reg52.h>define uchar unsigned char define uint unsigned int===以下IO定义请根据您硬件的连接修改===sbit T_RST=P35ds1302-5sbit T_IO=P34ds1

• 数码管显示程序6.pdf

  #

• 数码管动态显示程序.doc

  include<reg52.h>include<intrins.h>define uchar unsigned char define uint unsigned intsbit we0=P34sbit we1=P35sbit we2=P36sbit we3=P37sbit led0=P20sbit led1=P20sbit led2=P20sbit led3=P20sbit

• 数码管动态显示程序.doc

  无线遥控电动窗帘计数程序STL0 EQU 251STH0 EQU 253RXD BIT BIT BIT BIT BIT BIT BIT _A EQU 30HSJ_B EQU 31HSJ_C EQU 32HS

• 共阴数码管显示程序.doc

   t _blank 共阴数码管显示程序（汇编）include<>include<>define uchar unsigned chardefine uint unsigned intuchar code table[]={ 0x3f0x060x5b数码管显示的数值??????? 0x4f0x660x6d0x7d0x070x7f0x6f0x77??????? 0xbf0x860xdb带小数点

• 三位数码管显示程序.doc

  #

• c7数码管显示程序设计.ppt

  cg1六位共阳极数码管模块相同的段驱动端都并联在一起编程练习(R0)1共阴结构c共阳数码管D10MS：MOVR714H10ms延时子程序DLY：MOVR60F8HDLY1：DJNZR6DLY1DJNZR7DLYRETSEGTAB ： 段码表 DB3FH06H5BH4FH66H 01234

• 单片机数码管显示C程序.doc

  Display---------------------ADISPLAY_ 串行口显示子程序功能： DP-51板显示测试子程序说明： 显示从DBUF0指定单元开始的5个数据定义变量DBUF0 DATA 40H 显示缓冲区首址DBUF1 DATA 41HDBUF2 DATA